Presai ir korpusų raktai laikrodininkams

  • Presas stiklų įpresavimui ir korpusų uždarymui.

    Stable precision press, equipped with a head and a massive aluminium base mounted on 2 robust steel columns. The frontal part V shaped, allows the glass fitting without removing the extensible bracelets. The steel axle slides freely in a self lubricated sleeve for maximum precision: this is essential for fitting back cases, glasses or bezels without scratching. The end of the threaded axle (ø 6 mm ) is specially made for screwing all dies in a perfect horizontal position. Changing dies becomes easier. The lever covered with an anti-skid rubber and equipped with a return spring which allows a fine control of fitting pressure.
    MSA Broach Size mm Kg
    06.135 Simple 80 x 225 x 180 0.1980
  • Presas stiklų įpresavimui ir korpusų uždarymui.

    This precision rack-press is provided with a small slidethat allows to block or to free the toothed rack. The watchmaker thus has an exceptional tool for fitting glasses and bezels, closing watch cases and maintain the glass on the watch case during joining time. After screwing the die on the die holder, one can determine the best way to proceed : - free toothed rack (slide ahead): For usual work on steel watch cases, thick or sturdy; apply pressure on the lever provided with an anti-skid rubber. The return spring and the fixed handle allow for careful adjustment of pressure upon use. - blocked toothed rack (slide behind): For delicate work on gold cases, thin or delicate; pull the slide to lock the toothed rack in the desired position, then use the spanner, to fit the glass or the case back; with each rotation the die goes down about 1.5 mm. The fitting precision can be perfectly controlled.
    MSA Broach Size mm Kg
    06.135 Double 80 x 215 x 185 2.685
  • Korpusų atsukimo raktas. Maksimalus korpuso dydis 65 mm.

    Case opener delivered with 1 pair of jaws MSA 07.323-E. Also suitable for any pair of jaws MSA 07.323-x
    MSA Length mm Max opening mm Kg
    07.013 190 65 0.295
  • Korpusų atsukimo raktas. Maksimalus korpuso dydis 57 mm.

    Case opener delivered with 1 pair of jaws MSA 07.323-E. Also suitable for any pair of jaws MSA 07.323-x
    MSA Length mm Maximum opening mm Kg
    07.014 155 57 0.340
  • Korpusų atsukimo raktas. Maksimalus korpuso dydis 60 mm.

    Case opener delivered with 1 pair of jaws MSA 07.323-E. Use with jaws MSA 07.323-x
    MSA Length mm Maximum opening mm Kg
    07.023 270 60 0.260
  • Mini presas stiklų įpresavimui ir didelių korpusų uždarymui.

    Small HOROTEC® press equipped with a simple threaded broach. Delivered with an assortment of 9 screw-on reversible dies MSA 07.106, used to close snap-on case backs.
    MSA Broach Size mm Kg
    07.105 Simple 80 x 60 x 135 0.630
    Replacement parts:
    MSA Items
    07.105-A Upper dies holder
    07.105-V Screw for upper dies holder
  • Presas stiklų įpresavimui ir didelių korpusų uždarymui.

    Press for closing snap-on case back suitable for large dies ø delivered with a set of 12 large Delrin® screw dies detailed here bellow. Also suitable for slide dies in removing the upper adaptor MSA 07.130-A and reversing the lower adaptor MSA 07.130-B.
    MSA Size mm Kg
    07.131 110 x 95 x 210 1.210
    Press only:
    MSA Size mm Kg
    07.130 110 x 95 x 210 1.000
    Accessories:
    MSA Items
    07.130-A Upper adaptor for screw dies (1)
    07.130-B Reversible lower adaptor (2)
    MSA Items ø mm
    07.106-17 Screw die for snap-on case back 17
    07.106-1921 Screw die for snap-on case back 19-21
    07.106-2225 Screw die for snap-on case back 22-25
    07.106-2629 Screw die for snap-on case back 26-29
    07.106-3033 Screw die for snap-on case back 30-33
    07.106-3437 Screw die for snap-on case back 34-37
    07.106-3841 Screw die for snap-on case back 38-41
    07.106-4245 Screw die for snap-on case back 42.45
    07.106-4648 Screw die for snap-on case back 46-48
    07.106-49-50 Screw die for snap-on case back 49-50
    07.106-5255 Screw die for snap-on case back 52-55
    07.106--U Lower die universal 45  
  • Mini presas stiklų įpresavimui ir korpusų uždarymui su 8 priedais.

    Small HOROTEC® press with double threaded broach for fitting flat mineral glasses and closing snap-on case backs. Contents : - 1 press MSA 07.150 - 1 assortment of 6 dies MSA 07.111 - 1 die MSA 06.510-A01 ø 35-40 mm for fitting flat mineral glasses - 1 universal inferior die MSA 06.500-B hollowed ø 40 mm.
    MSA Broach Size mm Kg
    07.151 Double 95 x 75 x 170 0.910
  • Presas stiklų įpresavimui ir korpusų uždarymui.

    Rack-press with declutchable handle, suitable for screw and slide dies. The underneath front base is recessed and has a « V » shape allowing to fit glass or bezel withoutremoving the metal band from the watch.
    MSA Size mm Kg
    07.160 150 x 105 x 240 2.600
    Delivered with the accessories (1) to (5).
    MSA Items Kg
    07.160-1 Support on base ø 40 x 15 mm (1) 0.052
    07.160-2 Adaptor ø 40 x 10 mm (2) 0.040
    07.160-3 Adaptor ø 25 x 10 mm (3) 0.015
    07.160-4 Support on base ø 25 x 15 mm (4) 0.016
    07.160-5 Reversible adaptor ø 12 x 33 mm (5) 0.021
  • Presas stiklų įpresavimui ir korpusų uždarymui.

    Rack-press with declutchable handle, suitable for screw and slide dies. The underneath front base is recessed and has a « V » shape allowing to fit glass or bezel withoutremoving the metal band from the watch.
    MSA Size mm Kg
    07.161 150 x 105 x 240 2.800
    Delivered with the accessories (1) to (5).
    MSA Items Kg
    07.160-1 Support on base ø 40 x 15 mm (1) 0.052
    07.160-2 Adaptor ø 40 x 10 mm (2) 0.040
    07.160-3 Adaptor ø 25 x 10 mm (3) 0.015
    07.160-4 Support on base ø 25 x 15 mm (4) 0.016
    07.160-5 Reversible adaptor ø 12 x 33 mm (5) 0.021
  • Mini presas-staklės korpusų atsukimui ir užsukimui.

    Mini HOROTEC ® professional precision press. Small and robust, built in steel and aluminium. Equipped with removable and adjustable watch holder with 4 delrin dies to hold the watch cases surely and horizontally. First fit the case in the watch holder then unscrew the case back with the adjustable jaws holder. Excellent frontal, lateral or plunging view. Top wheel ø 75 cm.
  • Raktai ROLEX korpusų atsukimui.

    Set of 7 steel dies for opening/closing screw-on case backs type RX.
    MSA Items Kg
    07.326 Assortment of 7 dies type RX 0.211
    MSA Items Kg
    07.326-185 Die ø 18.5 mm 0.037
    07.326-202 Die ø 20.2 mm 0.043
    07.326-225 Die ø 22.5 mm 0.047
    07.326-265 Die ø 26.5 mm 0.056
    07.326-283 Die ø 28.3 mm 0.058
    07.326-295 Die ø 29.5 mm 0.064
    07.326-365 Die ø 36.5 mm 0.090
  • Raktai BAUME MERCIER korpusų atsukimui.

    Set of 3 steel dies for opening/closing screw-on case backs type BMe.
    MSA   Kg
    07.327   0.211
    MSA Items Kg
    07.327-025 Die ø 25 mm 0.047
    07.327-030 Die ø 30 mm 0.059
    07.327-033 Die ø 33 mm 0.067
  • Raktas CITIZEN AQUALAND korpuso atsukimui.

    Steel dies for opening/closing screw-on case backs type CT AQUALAND.
    MSA ø mm For cases Kg
    07.331 35 Type Aqualand 0.070
  • Raktai PANERAI korpusų atsukimui.

    Set of 4 steel dies for opening/closing screw-on case backs type PAN.
    MSA Kg
    07.334 0.532
    Replacement parts:
    MSA Items Kg
    07.334-030 Die type Pan. 0.089
    07.334-035 Die type Pan. 0.107
    07.334-039 Die type Pan. 0.104
    07.334-042 Die type Pan. 0.125
  • Raktai BRIETLING korpusų atsukimui.

    Steel dies for opening/closing screw-on case backs type BR. Dies sold individually.
    MSA ø mm For cases Kg
    07.335-034 36.2 BR type 15 sides (1) 0.037
    07.335-035 36.2 BR type 15 sides (2) 0.038
    07.335-036 38 BR type 15 sides (3) 0.041
    07.335-036-A 39 BR type 15 sides (4) 0.042
    07.335-037 40 BR type 15 sides (5) 0.041
    07.335-038 40 BR type 15 sides (6) 0.042
  • Raktai OMEGA SEAMASTER korpusų atsukimui.

    Set of 4 steel dies for opening/closing screw-on case backs type SEAM.
    MSA Kg
    07.336 0.582
    ,/br> Replacement parts:
    MSA Items Kg
    07.330-020 Die type Seam. Lady 0.095
    07.330-030 Die type Seam. Gent 0.095
    07.330-033 Die type Seam. 0.140
    07.330-042 Die type Seam. 0.141
  • Presas-staklės korpusų atsukimui, užsukimui su priedais (pilna versija).

    Complete version of the professional precision HOROTEC press. Heavy and robust for opening/closing screw-on case backs of all types of watches. - Large ergonomic top wheel ø 160 mm for screwing/unscrewing with no effort - Centre threaded broach with precise blocking ring - Solid steel supporting pillars covered with anti-skid and ergonomic synthetic material, for right and left handed - Base has a removable die tray for easy selection and storage - Removable watch holder with 12 holes for concave delrin dies and 4 holes for case lugs dies - Base equipped with 4 anti-skid feet.
    MSA Size mm Kg
    07.363 160 x 220 x 260 5.035
    Accessories:07.370Removable dies tray0.34507.325Assortment of 7 green suction dies0.32007.326Assortment of 7 dies type RX0.34007.327Assortment of 3 dies type BMe0.220
    MSA Items Kg
    07.344 Adjustable jaws holder, maxi opening 65 mm 0.225
    07.323-A 2 x Round jaws 0.003
    07.323-B 2 x Flat jaws 0.003
    07.323-C 2 x Square jaws 0.003
    07.323-D 2 x Knurled jaws 0.003
    07.360-A Watch holder with 4 concave dies, height 24 mm 0.110
  • Presas-staklės korpusų atsukimui, užsukimui su priedais.

    Rack-press delivered in the light version, to work in a traditional way.
    MSA Size mm Kg
    07.367 180 x 130 x 350 4.500
    Accessories:
    MSA Items Kg
    07.367-P Press only 4.000
    07.344 Adjustable jaws holder, maxi opening 65 mm 0.225
    07.323-A 2 x Round jaws 0.003
    07.323-B 2 x Flat jaws 0.003
    07.323-C 2 x Square jaws 0.003
    07.323-D 2 x Knurled jaws 0.003
    07.323-E 2 x Elongated jaws, reinforced square 0.004
    07.323-F 2 x Elongated jaws, reinforced square 0.004
    07.374 Case holder with 4 stacked jaws, height 29 mm 0.160
  • Presas-staklės korpusų atsukimui-užsukimui. Pilna versija.

    Rack-press delivered as a complete version, for traditional work or only with the suction dies. Equipped with 2 adapters allowing use of all the dies with thread ø 6 mm from the following assortments: MSA 06.520, 06.521, 06.522, 07.106 and 07.107.
    MSA Size mm Kg
    07.369 180 x 130 x 350 6.750
    Accessories:07.327Assortment of 3 dies type BMe0.22007.336Assortment of 4 dies type OM0.582
    MSA Items Kg
    07.367-P Press only 4.000
    07.344 Adjustable jaws holder, maxi opening 65 mm 0.225
    07.323-A 2 x Round jaws 0.003
    07.323-B 2 x Flat jaws 0.003
    07.323-C 2 x Square jaws 0.003
    07.323-D 2 x Knurled jaws 0.003
    07.323-E 2 x Elongated jaws, reinforced square 0.004
    07.323-F 2 x Elongated jaws, reinforced square 0.004
    07.371 Lower tray 0.270
    07.372 2 x Upper tray 0.325
    07.373-A Upper adapter ø 16 mm 0.016
    07.373-B Lower adapter ø 40 mm 0.089
    07.374 Case holder with 4 stacked jaws, height 29 mm 0.160
    07.333 Assortment of 7 red suction dies 0.140
    07.367-A Suction case holder 0.130
    07.326 Assortment of 7 dies type RX 0.430
  • WITCHI FILS profesionalus staklės-presas korpusų atidarymui.

Go to Top