| MSA | Voltage | Size mm | Kg |
|---|---|---|---|
| 19.403 | 220/110 V | 340 x 260 x 340 | 7.000 |
| MSA | Voltage | Size mm |
|---|---|---|
| 19.129 | 220 V | 260 x 170 x 110 |
| MSA | Width mm | ø mm |
|---|---|---|
| 19.167-B | 57 | 60 |
-
Laikrodžių korpusų sandarumo testeris. Nereikalingas kompresorius. GREINER ® LEAK-CHECKER PRIME waterproof tester for testing leaks up 0.7 bar vacuum. No additional compressor needed thanks to integrated pump. Suitable for any type of watches, included very small timepieces, ceramics. Results displayed on a colour 5” TFT capacity touchscreen (800 x 480pixels) or on thermo printer (see here bellow). Accessories:
GREINER ® thermo printer MARTEL 7810 suitable for all GREINER ® testers. Replacement thermo paper: -
Presas-staklės korpusų atsukimui-užsukimui. Pilna versija.
Rack-press delivered as a complete version, for traditional work or only with the suction dies. Equipped with 2 adapters allowing use of all the dies with thread ø 6 mm from the following assortments: MSA 06.520, 06.521, 06.522, 07.106 and 07.107.
Accessories:07.327Assortment of 3 dies type BMe0.22007.336Assortment of 4 dies type OM0.582MSA Size mm Kg 07.369 180 x 130 x 350 6.750 MSA Items Kg 07.367-P Press only 4.000 07.344 Adjustable jaws holder, maxi opening 65 mm 0.225 07.323-A 2 x Round jaws 0.003 07.323-B 2 x Flat jaws 0.003 07.323-C 2 x Square jaws 0.003 07.323-D 2 x Knurled jaws 0.003 07.323-E 2 x Elongated jaws, reinforced square 0.004 07.323-F 2 x Elongated jaws, reinforced square 0.004 07.371 Lower tray 0.270 07.372 2 x Upper tray 0.325 07.373-A Upper adapter ø 16 mm 0.016 07.373-B Lower adapter ø 40 mm 0.089 07.374 Case holder with 4 stacked jaws, height 29 mm 0.160 07.333 Assortment of 7 red suction dies 0.140 07.367-A Suction case holder 0.130 07.326 Assortment of 7 dies type RX 0.430 -
MTG 5000 testeris mechaniniams laikrodžiams. Profesionaliam naudojimui.
MTG 5000 tester for mechanical watches. Complete multifunction version for professional use, ideal for efficient and fast tests during production, after sales service and watch-test lab.
Functions: - measuring of beat rate (s/d) - measuring of beat error (ms) - automatic beat number detection (can also be set manually) - measurable beat numbers: 18.000, 19.800, 21.600, 25.200, 28.800 and 36.000 a/h - acoustic watch beat simulation (can be switched off) - measuring of amplitude (°) - programmed 6-position test mode with test report - long-term monitoring mode for rate and amplitude - own test programs can be created for long term monitoring mode - horizontally divisible screen - selectable graphic or numeric resolution 0,2 s/d or 1 s/d - TYAPS signal processing unit which automatically controls the signal level and filters side noise - highly stable TCXO time base - thermal printer connection (THERMOPRINT available optionally) - connection for automatic microphone (AUTOMIC-1 available optionally) Delivered with a 6 positions microphone ROTOMIC-1, 1 universal adapter, 1 protection cover and use instructions.MSA Voltage Casing size mm Kg 19.175 220V 240 x 195 x 135 2.320 -
MTG 4000 testeris mechaniniams laikrodžiams. Profesionaliam naudojimui.
MTG 4000 tester for mechanical watches. Complete multifunction version for professional use.
Functions: - measuring of beat rate (s/d) - measuring of beat error (ms) - automatic beat number detection (can also be set manually) - measurable beat numbers: 18.000, 19.800, 21.600, 25.200, 28.800 and 36.000 a/h - acoustic watch beat simulation (can be switched off) - measuring of amplitude (°) - programmed 6-position test mode with test report - stores 720 beats - “PAUSE“ and “SHIFT“ function to stop measuring and inspect the previous stored beats - TYAPS signal processing unit which automatically controls the signal level and filters side noise - highly stable TCXO time base (only PRO version) - german/english menu (only PRO version) - thermal printer connection (THERMOPRINT available optionally) - connection for automatic microphone (AUTOMIC-1 available optionally) Delivered with a 6 positions microphone ROTOMIC-1, 1 universal adapter, 1 protection cover and use instructions.MSA Version Voltage Size mm Kg 19.172 1 Microphone 220V 260 x 170 x 115 3.255 -
Laikrodžių korpusų sandarinimo testeris. The ELMA ® LEAK CONTROLLER 2000 waterproof tester produces a pressure difference between the interior and the exterior of the watch, thanks to a built-in vacuum. The 1/100 mm precision dial comparator records each variation on the watch case and indicates its pressure compensation. The equipment is almost mechanical, which allows even the tests of cheap watches with deformable glasses (no risk of glass breaking). Do not require any maintenance.MSA Voltage Size mm Kg 19.402 220 V ø 155 x 315 3.500 -
REGLOMAT FINAL TEST aparatas skirtas mechaninių rankinių automatinių laikrodžių tikslumo testavimui imituojant rankos judesius. Vienu metu testuoja 18 laikrodžių. PROFESIONALAMS.
Rotation apparatus for 18 watches including : - 3 arms with clips for 9 watches without bracelets - 3 arms with foam for 9 watches with bracelets The REGLOMAT apparatus (1 RPM) tests the following : slow winding, power on wrist, shock tests, calendar and detects hidden defects. The CYCLOTEST apparatus (4 RPM) tests the following : accelerated winding, wheel (and pinion) speed, and power reserve.MSA Apparatus Rotation Voltage Kg 19.205 REGLOMAT Final-Test 1RPM 220 V 2.780 -
Laikrodžių korpusų poliravimo įrankis.
Hand polishing system developed for the watch industry, particularly for watch cases finish, and modified by HOROTEC ® for the after sales service. These 2 versions tools are composed of a vice with 4 brass claws (inside tightening from ø 14 to 34 mm and from ø 25 to 50) mounted on ball bearings, allowing the POLISHING WITHOUT RISKING ANY FLATTENING on the item worked on (watch case, bezel, case back, ring, etc..). As soon as one comes in contact with the brush, the system starts turning at the same speed as the brush.MSA Model Kg 26.501 Right turning Bobino MSA 23.501-A (clockwise), ø 14 to 34 mm. 0.780 -
Presas-staklės korpusų atsukimui, užsukimui su priedais.
Rack-press delivered in the light version, to work in a traditional way.
Accessories:MSA Size mm Kg 07.367 180 x 130 x 350 4.500 MSA Items Kg 07.367-P Press only 4.000 07.344 Adjustable jaws holder, maxi opening 65 mm 0.225 07.323-A 2 x Round jaws 0.003 07.323-B 2 x Flat jaws 0.003 07.323-C 2 x Square jaws 0.003 07.323-D 2 x Knurled jaws 0.003 07.323-E 2 x Elongated jaws, reinforced square 0.004 07.323-F 2 x Elongated jaws, reinforced square 0.004 07.374 Case holder with 4 stacked jaws, height 29 mm 0.160 -
Presas-staklės korpusų atsukimui, užsukimui su priedais (pilna versija).
Complete version of the professional precision HOROTEC press. Heavy and robust for opening/closing screw-on case backs of all types of watches. - Large ergonomic top wheel ø 160 mm for screwing/unscrewing with no effort - Centre threaded broach with precise blocking ring - Solid steel supporting pillars covered with anti-skid and ergonomic synthetic material, for right and left handed - Base has a removable die tray for easy selection and storage - Removable watch holder with 12 holes for concave delrin dies and 4 holes for case lugs dies - Base equipped with 4 anti-skid feet.
Accessories:07.370Removable dies tray0.34507.325Assortment of 7 green suction dies0.32007.326Assortment of 7 dies type RX0.34007.327Assortment of 3 dies type BMe0.220MSA Size mm Kg 07.363 160 x 220 x 260 5.035 MSA Items Kg 07.344 Adjustable jaws holder, maxi opening 65 mm 0.225 07.323-A 2 x Round jaws 0.003 07.323-B 2 x Flat jaws 0.003 07.323-C 2 x Square jaws 0.003 07.323-D 2 x Knurled jaws 0.003 07.360-A Watch holder with 4 concave dies, height 24 mm 0.110 -
CALYPSO laikrodžių korpusų sandarumo testeris su vandeniu. Iki 10 bar. Rankinė pompa. CALYPSO waterproof tester up to 10 bars used with water. Suitable for both air admission by a manual pump or compressor (not delivered). On Compressor mode, the pressure adjustment inside the cylinder ø 80 mm (for 2 watches) is made with an air-gate located in front of the tester.MSA Model Size mm Kg 19.424 Plus 200 x 170 x 270 3.500 -
CALYPSO laikrodžių korpusų sandarumo testeris su vandeniu. Iki 10 bar. Naudojamas su kompresoriumi (į komplektą neįeina). CALYPSO waterproof tester up to 10 bars used with water. Cylinder ø 80 mm for 2 watches. To be used with 1 compressor (not included). The pressure adjustment is made with an air-gate located in front of the tester.MSA Model Size mm Kg 19.425 Minus 200 x 170 x 270 3.500 -
Mechanizmų laikiklis VALJOUX 7750, 7753 mechanizmams.
Round movement holder with 6 pushers.MSA Calibre Kg 09.011 VAL 7750-53 0.125 -
Presas stiklų įpresavimui ir korpusų uždarymui.
Rack-press with declutchable handle, suitable for screw and slide dies. The underneath front base is recessed and has a « V » shape allowing to fit glass or bezel withoutremoving the metal band from the watch.
Delivered with the accessories (1) to (5).MSA Size mm Kg 07.161 150 x 105 x 240 2.800 MSA Items Kg 07.160-1 Support on base ø 40 x 15 mm (1) 0.052 07.160-2 Adaptor ø 40 x 10 mm (2) 0.040 07.160-3 Adaptor ø 25 x 10 mm (3) 0.015 07.160-4 Support on base ø 25 x 15 mm (4) 0.016 07.160-5 Reversible adaptor ø 12 x 33 mm (5) 0.021 -
Multifunkcinis laikrodininko testeris. Įtampos, varžos ir srovės matavimas. Multifonction watch tester. It measures battery voltage, resistances and current consumption. Delivered with batteries and instructions.MSA Size mm Kg 19.100 80 x 160 x 40 0.475 -
Presas stiklų įpresavimui ir korpusų uždarymui.
This precision rack-press is provided with a small slidethat allows to block or to free the toothed rack. The watchmaker thus has an exceptional tool for fitting glasses and bezels, closing watch cases and maintain the glass on the watch case during joining time. After screwing the die on the die holder, one can determine the best way to proceed : - free toothed rack (slide ahead): For usual work on steel watch cases, thick or sturdy; apply pressure on the lever provided with an anti-skid rubber. The return spring and the fixed handle allow for careful adjustment of pressure upon use. - blocked toothed rack (slide behind): For delicate work on gold cases, thin or delicate; pull the slide to lock the toothed rack in the desired position, then use the spanner, to fit the glass or the case back; with each rotation the die goes down about 1.5 mm. The fitting precision can be perfectly controlled.MSA Broach Size mm Kg 06.135 Double 80 x 215 x 185 2.685 -
Presas stiklų įpresavimui ir korpusų uždarymui.
Rack-press with declutchable handle, suitable for screw and slide dies. The underneath front base is recessed and has a « V » shape allowing to fit glass or bezel withoutremoving the metal band from the watch.
Delivered with the accessories (1) to (5).MSA Size mm Kg 07.160 150 x 105 x 240 2.600 MSA Items Kg 07.160-1 Support on base ø 40 x 15 mm (1) 0.052 07.160-2 Adaptor ø 40 x 10 mm (2) 0.040 07.160-3 Adaptor ø 25 x 10 mm (3) 0.015 07.160-4 Support on base ø 25 x 15 mm (4) 0.016 07.160-5 Reversible adaptor ø 12 x 33 mm (5) 0.021 -
MTG 500 testeris mechaniniams laikrodžiams. Paprasčiausia versija.
MTG 500 tester for mechanical watches. Simple version ideal for fast test in the shop after sales service.
Functions: - measuring of beat rate (s/d) - measuring of beat error (ms) - automatic beat number detection - measurable beat numbers : 18.000, 19.800, 21.600, 25.200, 28.800 and 36.000 a/h - acoustic watch beat simulation (can be switched off) Monochrome LCD screen 101 x 36 mm. Delivered with a microphone SMIC-1, 1 universal adapter, 1 protection cover and use instructions.MSA Voltage Casing size mm Kg 19.162 220V 190 x 115 x 100 1.500 -
Mechanizmų laikiklis RONDA 5040F mechanizmui.
Round movement holder with 5 pushers.MSA Calibre Kg 09.010-52 R 5040-F 0.160 -
Stereoskopinis mikroskopas laikrodininkams.
Stereoscopic microscope NOVEX ® P series. Binocular head: oblique at 45° rotating at 360° and adjustable inter-pupillary distance from 55 to 75 mm. One tube has a dioptre adjustment facility. Maximum object height is 30 mm. Illumination: transmitted or incident halogen illumination 12 V - 10 W (it can be used individually or simultaneously). Integrated transformer. Complete with a 3 position switch and 1 network cable. Wide field eyepieces: WF 10x/20 (with eyeshades). Objective: 2x and 4x on a rotating revolver. Magnification: 20x/40x (field of view 10 and 5 mm). Including: black/white and frosted stage plates, 2 clamps, dustcover and polystyrene box.MSA Voltage Kg 00.283 220 V 3.080 -
12 laikrodininko atsuktuvų rinkinys su besisukančiu stovu. Komplekte 21 atsarginis antgalis.
Set of 12 watchmaker screwdrivers with knurled stainless steel handle MSA 01.201-xxx, on aluminium solid stand with colour coded holes for fast ø identification and non-skid base. Delivered with 21 replacement hardened blue steel blades stored in the central compartment of the stand protected by the red cover.MSA Blades ø mm Kg 01.205 0.5 - 0.6 - 0.7 - 0.8 - 1 1.2 - 1.4 - 1.5 - 1.6 - 2 - 2.5 - 3 0.890 -
HOROTEC ® FLASHTEST multifunkcinis testeris. HOROTEC ® FLASHTEST, multifunction tester for analogue quartz watches and movements. Possible to update the software and calibration thanks to the set MSA 19.108-S (sold separately).
Functions : - battery tension - battery tension under load - coil impulse (sound signal) - power supply for movements 1,5 and 3 V - coil resistance - circuit consumption - fast gear train rotation - watch accuracy (forward/delay s/m). Display : LCD light screen 29 x 23 mm, numerals height 15 mm. Measurement capacity : 0-19.999 V, μA or kΩ. Precision : 1/100 of V, μA or kΩ. Delivered with 2 probes , adaptor 110/220V, 9V battery, multi-lingual manual instructions with chart for electric controls (movements consumption under load et coils continuity). Accessories:MSA Voltage Size mm Kg 19.108 Dual 110 V/220 V 155 x 172 x 55 1.235
Replacement parts:MSA Item 19.108-S Calibration kit (1) and USB Flashtest update (2) MSA Item 19.108-A Pair of probes -
Mini presas-staklės korpusų atsukimui ir užsukimui.
Mini HOROTEC ® professional precision press. Small and robust, built in steel and aluminium. Equipped with removable and adjustable watch holder with 4 delrin dies to hold the watch cases surely and horizontally. First fit the case in the watch holder then unscrew the case back with the adjustable jaws holder. Excellent frontal, lateral or plunging view. Top wheel ø 75 cm. -
Mechanizmų laikiklis RONDA 4002-B, 4003-B, 4120-B, 4210-B, 4220-B, 5010-B, 5020-B, 5022-D, 5030-D, 5040-B, 5040-D, 5050-B, 5050-C, 5051-C, 5130-B, 5130-D mechanizmams.
Round movement holder with 2 pushers.MSA Calibre Kg 09.010-47 R 4002-B, R 4003-B, R 4120-B, R 4210-B, R 4220-B, R 5010-B, R 5020-B, R 5022-D, R 5030-D, R 5040-B, R 5040-D, R 5050-B, R 5050-C, R 5051-C, R 5130-B, R 5130-D. 0.170 -
Mechanizmų laikiklis ETA G10211, ETA G10711 mechanizmams.
Round movement holder with 2 pushers.MSA Calibre Kg 09.010-44 G10211/711 0.095 -
Mechanizmų laikiklis ETA 251.262 mechanizmui.
Round movement holder with 4 pushers.MSA Calibre Kg 09.010-21 ETA 251.262 0.090 -
12 laikrodininko atsuktuvų rinkinys su besisukančiu stovu. Komplekte 21 atsarginis antgalis.
Set of 12 watchmaker screwdrivers with knurled stainless steel handle MSA 01.201-xxx on aluminium solid stand, turning on non-skid base. Delivered with 21 replacement hardened-blue steel blades stored in the centre compartment of the stand.MSA Blades ø mm Kg 01.201-C 0.5 - 0.6 - 0.7 - 0.8 - 1 - 1.2 - 1.4 - 1.5 - 1.6 - 2 - 2.5 - 3 1.006 -
Bezelių (besisukančių žiedų ant korpuso) nuėmimo įrankis.
Bezels remover with 4 tempered stainless steel polished blades opening until 60 mm.
Replacement parts:MSA Size mm Kg 07.117 150 x 60 x 65 0.880 MSA Size mm 07.117-A 1 spare blade only -
Presas-staklės sektorių varžtams atsukti-užsukti.
Horotec ress for locking and unlocking oscillation weight bolts. The broach is mounted on spring for a fast and precise job. The broach is easy interchangeable in unscrewing the black handle. Delivered with and without movement holders 7750, 7751, 753, 2892, 2893, 2894, 2895. This tool is adapted for series.
Horotec movement holders only for MSA 03.676-7750 and 03.676-2892.MSA For calibres MVT holder Kg 03.676-7750 7750 - 7751 - 7753 Withoout 0.665 03.676-2892 2892 - 2893 - 2894 - 2895 Without 0.665 03.677-7750 7750 - 7751 - 7753 With 0.755 03.677-2892 2892 - 2893 - 2894 - 2895 With 0.735 MSA For calibres Kg 03.678-7750 7750 - 7751 - 7753 0.090 03.678-2892 2892 - 2893 - 2894 - 2895 0.070 -
Ypač plonų laikrodžių korpusų atidarymo staklės. HOROTEC ® tool for opening snap-on watch case backs and extracting snap-on bezels. Allows a precise adjustment due to an anti-skid case holder mounted on a spring. De live red with 2 pairs of hardened steel polished blades, 1 bored case-supporting delrin die to avoid damaging crowns and pushers. The tool is equipped with precision sliding carriage for delicately extracting of glasses or recalcitrant case backs.
Replacement parts:MSA Size mm Kg 07.115 120 x 75 x 85 0.960
Accessories for HOROTEC ® tool MSA 07.115. Set of 2 accessories adaptable to MSA 07.115 for bracelet pins remove. Pins delivered separately.MSA Items Kg 07.115-A Hardened steel blade 2 mm 0.009 07.115-B Hardened steel blade 4 mm 0.009 07.115-C Case-supporting die, hole Ø 10 mm 0.009 07.115-D Hardened steel stem 0.009
Set of 2 pairs of mirror polished blades adaptable to MSA 07.115 for bezels or snap-on case back remove opening until 40 mm.MSA Items Kg 07.115-A Bracelet-rest die, hole ø 3 mm (1) 0.009 07.115-E Pins holder (2) 0.009
Replacement parts:MSA Items Kg 07.115-F 2 paire of mirror polished blades (1) 0.085 MSA Item 07.117-A 1 spare blade only -
Mechanizmų laikiklis ETA 2894-2 mechanizmui.
Round movement holder with 2 pushers.MSA Calibre Kg 09.010-40 2894-2 0.070