LOCTITE® 3491 klijai mineraliniams ir safyriniams stiklams.
LOCTITE ® 3491 glue for watch mineral and sapphire glasses. High transparency, low yellowing. Application by automatic system MSA 19.770 or 19.771
| MSA | Contents | Size mm | Kg |
|---|---|---|---|
| 26.512 | 25 ml | 120 x 40 | 0.050 |
Raktai ROLEX korpusų atsukimui.
Set of 7 steel dies for opening/closing screw-on case backs type RX.
| MSA | Items | Kg |
|---|---|---|
| 07.326 | Assortment of 7 dies type RX | 0.211 |
| MSA | Items | Kg |
| 07.326-185 | Die ø 18.5 mm | 0.037 |
| 07.326-202 | Die ø 20.2 mm | 0.043 |
| 07.326-225 | Die ø 22.5 mm | 0.047 |
| 07.326-265 | Die ø 26.5 mm | 0.056 |
| 07.326-283 | Die ø 28.3 mm | 0.058 |
| 07.326-295 | Die ø 29.5 mm | 0.064 |
| 07.326-365 | Die ø 36.5 mm | 0.090 |
Mechanizmų laikiklis ETA 2892 mechanizmui.
Round movement holder with 4 pushers.
| MSA | Calibre | Kg |
|---|---|---|
| 09.010-35 | 2892 | 0.088 |
MOEBIUS sintetinis tepalas. Žiūr. rekomendacinė tepimo lentelė.
Synthetic oil for mechanical watches, train wheels, barrels, steel/steel friction, precision instruments, motors, small ball bearings, etc. the SYNT-HP is convenientfor high pressure and stability is needed on precise mechanisms.
| Moebius Synt-HP 500 | Viscosity cSt | |||||
| MSA | ml | Temp. °C | 0°C | 20°C | 50°C | Kg |
|---|---|---|---|---|---|---|
| 28.9101-020 | 20ml | -35 to +100 | 2300 | 511 | 33 | 0.070 |
| 28.9101-050 | 50ml | -35 to +100 | 2300 | 511 | 33 | 0.100 |
Automatinė tepalinė.
Automatic oiler allows dropping oil with meticulousness and precision. Oil in the oiler is protected against dust. All elements are interchangeable. There are 5 available versions (1A, 2A, 5, 12 and 15) with 3 different dropping types. Delivered with plastic stand and instructions.
Korpusų atsukimo raktas. Maksimalus korpuso dydis 60 mm.
Case opener delivered with 1 pair of jaws MSA 07.323-E. Use with jaws MSA 07.323-x
| MSA | Length mm | Maximum opening mm | Kg |
|---|---|---|---|
| 07.023 | 270 | 60 | 0.260 |
9 laikrodininko atsuktuvų rinkinys medinėje dėžutėje.
Set of 9 watchmaker screwdrivers with knurled stainless steel handle MSA 01.201-xxx. Delivered in a wooden case with 9 replacement hardened-bleu steel blades and 2 fixing screws.
| MSA | Blades ø mm | Kg |
|---|---|---|
| 01.201-A | 0.6 – 0.8 – 1 – 1.2 – 1.4 – 1.6 – 2 – 2.5 – 3 | 0.210 |
Mini presas stiklų įpresavimui ir didelių korpusų uždarymui.
Small HOROTEC® press equipped with a simple threaded broach. Delivered with an assortment of 9 screw-on reversible dies MSA 07.106, used to close snap-on case backs.
| MSA | Broach | Size mm | Kg |
|---|---|---|---|
| 07.105 | Simple | 80 x 60 x 135 | 0.630 |
Replacement parts:
| MSA | Items |
|---|---|
| 07.105-A | Upper dies holder |
| 07.105-V | Screw for upper dies holder |
Mini presas stiklų įpresavimui ir korpusų uždarymui su 8 priedais.
Small HOROTEC® press with double threaded broach for fitting flat mineral glasses and closing snap-on case backs. Contents : – 1 press MSA 07.150 – 1 assortment of 6 dies MSA 07.111 – 1 die MSA 06.510-A01 ø 35-40 mm for fitting flat mineral glasses – 1 universal inferior die MSA 06.500-B hollowed ø 40 mm.
| MSA | Broach | Size mm | Kg |
|---|---|---|---|
| 07.151 | Double | 95 x 75 x 170 | 0.910 |
Mechanizmų laikiklis VALJOUX 7750 mechanizmui.
Round movement holder with 2 pushers.
| MSA | Calibre | Kg |
|---|---|---|
| 09.010-20 | VAL 7750 | 0.087 |
Replacement parts:
| MSA | Size mm |
|---|---|
| 09.010-20-V | Central screw for MSA 09.010-20 |
Mechanizmų laikiklis veleno išėmimui. Naudojamas kartu su MNA 09.010-47
Movement holder for stem remove.
| MSA | Calibre | Kg |
|---|---|---|
| 09.016-47 | R 4002-B, R 4003-B, R 4120-B, R 4210-B, R 4220-B, R 5010-B, R 5020-B, R 5022-D, R 5030-D, R 5040-B, R 5040-F, R 5040-D, R 5050-B, R 5050-C, R 5051-C, R 5130-D. | 0.060 |
Presas-įrankis darbui su apyrankėmis ir jų varžtais.
Press for rapidly assembling and disassembling bracelet pins and screws. Stand accessories easily accessible. The vertical guide allows a perfect alignment with bracelet screws and pins. It is equipped with a device that holds the pins holder, leaving the operator hands free.
| MSA | Size mm | Kg |
|---|---|---|
| 10.500 | 60 x 80 x 110 | 0.465 |
Replacement parts:
| MSA | Items |
|---|---|
| 10.500-A | Pin holder, bore ø 2 mm, length 80 mm for MSA 10.499 and 10.500 |
| 10.500-B | O’ring gasket for pins holder MSA 10.500-A and blade holder MSA 10.504 |
| 10.500-C | Support for bracelet holder for MSA 10.499 and 10.500 |
| 10.500-D | Ball for pins holder MSA 10.500-A and blade holder MSA 10.504 |
| 10.500-E | Slotted delrin conical bracelet protection, to fit on MSA 10.505. For MSA 10.500 |
| 10.504 | Knurled blade handle, length 84 mm For MSA 10.500 |
| 10.505 | Counter screw blade holder for MSA 10.500, used for bracelet screws |
Profesionalus elektroninis laikrodininko įrankių išmagnetintojas.
Professional electronic demagnetizer for watchmaker tools, tweezers,… Delivered with 110V/220V dual adapter and instructions.
| MSA | Voltage | Size mm | Kg |
|---|---|---|---|
| 19.903 | 110 V/220 V | 90 x 150 x 30 | 0.905 |
Mechanizmų laikikliai ETA 251.471, ETA 2094 ir RONDA 5030R mechanizmams.
Round movement holder with 2 pushers.
| MSA | Calibres | Kg |
|---|---|---|
| 09.010-29 | 251.471 | 0.070 |
| 09.010-33 | 2094 | 0.070 |
| 09.010-34 | 5030R | 0.070 |
Mechanizmų laikiklis UNITAS 6497/6498 mechanizmui.
Round movement holder.
| MSA | Calibre | Kg |
|---|---|---|
| 09.010-38 | UNITAS 6497/6498 | 0.102 |
Presas stiklų įpresavimui ir didelių korpusų uždarymui.
Press for closing snap-on case back suitable for large dies ø delivered with a set of 12 large Delrin® screw dies detailed here bellow. Also suitable for slide dies in removing the upper adaptor MSA 07.130-A and reversing the lower adaptor MSA 07.130-B.
| MSA | Size mm | Kg |
|---|---|---|
| 07.131 | 110 x 95 x 210 | 1.210 |
Press only:
| MSA | Size mm | Kg |
|---|---|---|
| 07.130 | 110 x 95 x 210 | 1.000 |
Accessories:
| MSA | Items |
|---|---|
| 07.130-A | Upper adaptor for screw dies (1) |
| 07.130-B | Reversible lower adaptor (2) |
| MSA | Items | ø mm |
|---|---|---|
| 07.106-17 | Screw die for snap-on case back | 17 |
| 07.106-1921 | Screw die for snap-on case back | 19-21 |
| 07.106-2225 | Screw die for snap-on case back | 22-25 |
| 07.106-2629 | Screw die for snap-on case back | 26-29 |
| 07.106-3033 | Screw die for snap-on case back | 30-33 |
| 07.106-3437 | Screw die for snap-on case back | 34-37 |
| 07.106-3841 | Screw die for snap-on case back | 38-41 |
| 07.106-4245 | Screw die for snap-on case back | 42.45 |
| 07.106-4648 | Screw die for snap-on case back | 46-48 |
| 07.106-49-50 | Screw die for snap-on case back | 49-50 |
| 07.106-5255 | Screw die for snap-on case back | 52-55 |
| 07.106–U | Lower die universal 45 |
Mechanizmų laikiklis ETA 2894 mechanizmui.
Round movement holder with 2 pushers.
| MSA | Calibre | Kg |
|---|---|---|
| 09.010-30 | 2894 | 0.093 |
Presas stiklų įpresavimui ir korpusų uždarymui.
Stable precision press, equipped with a head and a massive aluminium base mounted on 2 robust steel columns. The frontal part V shaped, allows the glass fitting without removing the extensible bracelets. The steel axle slides freely in a self lubricated sleeve for maximum precision: this is essential for fitting back cases, glasses or bezels without scratching. The end of the threaded axle (ø 6 mm ) is specially made for screwing all dies in a perfect horizontal position. Changing dies becomes easier. The lever covered with an anti-skid rubber and equipped with a return spring which allows a fine control of fitting pressure.
| MSA | Broach | Size mm | Kg |
|---|---|---|---|
| 06.135 | Simple | 80 x 225 x 180 | 0.1980 |
Professional electronic demagnetizer for watchmaker tools, tweezers,…
Delivered with 110V/220V dual adapter and instructions.
| MSA | Voltage | Size mm | Kg |
|---|---|---|---|
| 19.905 | 110 V/220 V | 90 x 150 x 30 | 0.905 |
Raktai PANERAI korpusų atsukimui.
Set of 4 steel dies for opening/closing screw-on case backs type PAN.
| MSA | Kg |
|---|---|
| 07.334 | 0.532 |
Replacement parts:
| MSA | Items | Kg |
|---|---|---|
| 07.334-030 | Die type Pan. | 0.089 |
| 07.334-035 | Die type Pan. | 0.107 |
| 07.334-039 | Die type Pan. | 0.104 |
| 07.334-042 | Die type Pan. | 0.125 |
Mechanizmų laikiklis ETA 2894-2 mechanizmui.
Round movement holder with 2 pushers.
| MSA | Calibre | Kg |
|---|---|---|
| 09.010-40 | 2894-2 | 0.070 |
Ypač plonų laikrodžių korpusų atidarymo staklės.
HOROTEC ® tool for opening snap-on watch case backs and extracting snap-on bezels. Allows a precise adjustment due to an anti-skid case holder mounted on a spring. De live red with 2 pairs of hardened steel polished blades, 1 bored case-supporting delrin die to avoid damaging crowns and pushers. The tool is equipped with precision sliding carriage for delicately extracting of glasses or recalcitrant case backs.
| MSA | Size mm | Kg |
|---|---|---|
| 07.115 | 120 x 75 x 85 | 0.960 |
Replacement parts:
| MSA | Items | Kg |
|---|---|---|
| 07.115-A | Hardened steel blade 2 mm | 0.009 |
| 07.115-B | Hardened steel blade 4 mm | 0.009 |
| 07.115-C | Case-supporting die, hole Ø 10 mm | 0.009 |
| 07.115-D | Hardened steel stem | 0.009 |
Accessories for HOROTEC ® tool MSA 07.115. Set of 2 accessories adaptable to MSA 07.115 for bracelet pins remove. Pins delivered separately.
| MSA | Items | Kg |
|---|---|---|
| 07.115-A | Bracelet-rest die, hole ø 3 mm (1) | 0.009 |
| 07.115-E | Pins holder (2) | 0.009 |
Set of 2 pairs of mirror polished blades adaptable to MSA 07.115 for bezels or snap-on case back remove opening until 40 mm.
| MSA | Items | Kg |
|---|---|---|
| 07.115-F | 2 paire of mirror polished blades (1) | 0.085 |
Replacement parts:
| MSA | Item |
|---|---|
| 07.117-A | 1 spare blade only |
Presas-staklės sektorių varžtams atsukti-užsukti.
Horotec ress for locking and unlocking oscillation weight bolts. The broach is mounted on spring for a fast and precise job. The broach is easy interchangeable in unscrewing the black handle. Delivered with and without movement holders 7750, 7751, 753, 2892, 2893, 2894, 2895. This tool is adapted for series.
| MSA | For calibres | MVT holder | Kg |
|---|---|---|---|
| 03.676-7750 | 7750 – 7751 – 7753 | Withoout | 0.665 |
| 03.676-2892 | 2892 – 2893 – 2894 – 2895 | Without | 0.665 |
| 03.677-7750 | 7750 – 7751 – 7753 | With | 0.755 |
| 03.677-2892 | 2892 – 2893 – 2894 – 2895 | With | 0.735 |
Horotec movement holders only for MSA 03.676-7750 and 03.676-2892.
| MSA | For calibres | Kg |
|---|---|---|
| 03.678-7750 | 7750 – 7751 – 7753 | 0.090 |
| 03.678-2892 | 2892 – 2893 – 2894 – 2895 | 0.070 |
Bezelių (besisukančių žiedų ant korpuso) nuėmimo įrankis.
Bezels remover with 4 tempered stainless steel polished blades opening until 60 mm.
| MSA | Size mm | Kg |
|---|---|---|
| 07.117 | 150 x 60 x 65 | 0.880 |
Replacement parts:
| MSA | Size mm |
|---|---|
| 07.117-A | 1 spare blade only |
12 laikrodininko atsuktuvų rinkinys su besisukančiu stovu. Komplekte 21 atsarginis antgalis.
Set of 12 watchmaker screwdrivers with knurled stainless steel handle MSA 01.201-xxx on aluminium solid stand, turning on non-skid base. Delivered with 21 replacement hardened-blue steel blades stored in the centre compartment of the stand.
| MSA | Blades ø mm | Kg |
|---|---|---|
| 01.201-C | 0.5 – 0.6 – 0.7 – 0.8 – 1 – 1.2 – 1.4 – 1.5 – 1.6 – 2 – 2.5 – 3 | 1.006 |
Mechanizmų laikiklis ETA 251.262 mechanizmui.
Round movement holder with 4 pushers.
| MSA | Calibre | Kg |
|---|---|---|
| 09.010-21 | ETA 251.262 | 0.090 |
Mechanizmų laikiklis ETA G10211, ETA G10711 mechanizmams.
Round movement holder with 2 pushers.
| MSA | Calibre | Kg |
|---|---|---|
| 09.010-44 | G10211/711 | 0.095 |
Mechanizmų laikiklis RONDA 4002-B, 4003-B, 4120-B, 4210-B, 4220-B, 5010-B, 5020-B, 5022-D, 5030-D, 5040-B, 5040-D, 5050-B, 5050-C, 5051-C, 5130-B, 5130-D mechanizmams.
Round movement holder with 2 pushers.
| MSA | Calibre | Kg |
|---|---|---|
| 09.010-47 | R 4002-B, R 4003-B, R 4120-B, R 4210-B, R 4220-B, R 5010-B, R 5020-B, R 5022-D, R 5030-D, R 5040-B, R 5040-D, R 5050-B, R 5050-C, R 5051-C, R 5130-B, R 5130-D. | 0.170 |
Mini presas-staklės korpusų atsukimui ir užsukimui.
Mini HOROTEC ® professional precision press. Small and robust, built in steel and aluminium. Equipped with removable and adjustable watch holder with 4 delrin dies to hold the watch cases surely and horizontally. First fit the case in the watch holder then unscrew the case back with the adjustable jaws holder. Excellent frontal, lateral or plunging view. Top wheel ø 75 cm.
HOROTEC ® FLASHTEST multifunkcinis testeris.
HOROTEC ® FLASHTEST, multifunction tester for analogue quartz watches and movements. Possible to update the software and calibration thanks to the set MSA 19.108-S (sold separately).
| MSA | Voltage | Size mm | Kg |
|---|---|---|---|
| 19.108 | Dual 110 V/220 V | 155 x 172 x 55 | 1.235 |
Functions : – battery tension – battery tension under load – coil impulse (sound signal) – power supply for movements 1,5 and 3 V – coil resistance – circuit consumption – fast gear train rotation – watch accuracy (forward/delay s/m). Display : LCD light screen 29 x 23 mm, numerals height 15 mm. Measurement capacity : 0-19.999 V, μA or kΩ. Precision : 1/100 of V, μA or kΩ. Delivered with 2 probes , adaptor 110/220V, 9V battery, multi-lingual manual instructions with chart for electric controls (movements consumption under load et coils continuity). Accessories:
| MSA | Item |
|---|---|
| 19.108-S | Calibration kit (1) and USB Flashtest update (2) |
Replacement parts:
| MSA | Item |
|---|---|
| 19.108-A | Pair of probes |